Our fixed panel solution is designed to be a permanent fixture which can transform your canopy or carport into a part, or fully enclosed area.
The materials used are 16mm polycarbonate, the same material as the roof panels on standard LuMac canopies, or our clear as glass premium option, which is 6mm plate polycarbonate. These materials’ have been selected by us as they are durable, weatherproof and the strongest on the market. The 16mm polycarbonate is available in a range of finishes: clear, opal and bronze to suit your current structure.
Our fixed panel solution allows you to enclose either one or both sides of your LuMac Canopy. This option is ideal for providing additional protection or privacy, and can be customized to fit your specific needs. The panels are designed to fit the opening of your canopy located beneath the pitched section of your roof. Please note that sides are calculated based on the underside of your gutter being 2100mm and there will be a 100mm gap at the bottom to comply with safety requirements.
This option allows you to enclose either one or multiple openings of your LuMac Canopy. When we use the term front we are referring to the opening of your canopy that is underneath the gutter and between support posts (legs). Please note fronts are calculated on the underside of your gutter being 2100mm & there will be a 100mm gap at the bottom to meet the necessary safety requirements.
This option allows you to enclose the pitched section at the end of your canopy. It’s often used when a fence runs alongside your canopy and you’d like some added protection from the rain. This option is only available from the top of your post, we cannot offer a solution halfway down the post, unfortunately.
This option is a combination of both the side and front enclosures. Please note full enclosures are calculated on the underside of your gutter being 2100mm & there will be a 100mm gap at the bottom to meet the necessary safety requirements.
Copyright © 2024 - LuMac Canopies - All rights reserved.
